Mini-Split AC Cover - Bronze

$399.00

The Airdeko® cover is the perfect solution to hide the outdoor unit of your mini-split system. It is durable, easy to install, and compatible with most mini-split air conditioning or heat pump models.

High-grade 3mm aluminum panels
Minimalist design with no visible screws
Large louvers for air flow circulation
Reduce system noise by up to 30%
Protects against bad weather, hailstones, snow, leaves etc...
Warranty terms : 15 years

Size (Sizing guide)

Small

Medium

Large

Color

Ready to ship

Low, flat rate shipping and flexible return policy

Wondering which size to buy and how to install it? Send us a picture of your installation at 305-439-5532. Jerry will get back to you within 15 minutes.

Inner dimensions:

S : width 37.4 in, height 26.5 in, depth 17.7 in
(between 6000 BTU and 15 000 BTU)
M : width 43.3 in, height 34.5 in, depth 19.7 in
(between 18 000 BTU and 24 000 BTU)
L : width 45.3 in, height 47.0 in, depth 19.7 in
(over 24 000 BTU)

Outer dimensions:

S : width 39.3 in, height 27.5 in, depth 19.7 in
(between 6000 BTU and 15 000 BTU)
M : width 45.2 in, height 34.6 in, depth 21.6 in
(between 18 000 BTU and 24 000 BTU)
L : width 47.2 in, height 47.2 in, depth 21.6 in
(over 24 000 BTU)

Installation:

Easy assembly and removal
Can stand on its own around your condenser without screws or bolts
Can also be bolted to the ground or concrete slab
Our cover fits any concrete slab size (from 30 to 45 inches width or depth)
See detailed installation instructions

FAQ

Assembling the AirDeko cover only takes a few minutes. The installation might take a little longer if you need to mount the cover to a wall or concrete slab. A detailed installation guide can be found on our installation page.

Yes, the Airdeko Extension Arm Kit is designed to give you the adjustable reach you need to mount your cover against the wall. The 4 arms extend in and out of the cover up to 8 inches.

Yes, the Airdeko cover is easily removable. You can simply lift it out if placed on the ground. If it is mounted on the wall, simply lift the cover up to detach it from the wall mounts (no tools required).

When measuring your condenser, you need to include the lines or pipes you want to hide. If the condenser is placed on a concrete slab, you will need to measure the width of the slab. The Airdeko cover comes with angle bars that can adjust to your concrete slab.

For oversized condensers (ex: multi zone systems with two fans), we have designed our covers to be perfectly stackable. You can order 2 covers and stack them to provide the clearance they need to install on your system.

No, the Airdeko cover won’t materially impact your air conditioning’s performance. It has been designed and tested by professionals. The louvers on the cover allow seamless airflow circulation required for the proper operation of your system. The Airdeko cover also protects your system from weather and nature elements such as hail, snow, branches, dust and more.

We offer 3 standard colors: Charcoal, Off-White and Bronze. We do offer custom colors for orders of 50 covers or more. If you need a custom color on a small order, you can easily paint your cover with a metal paint.

Yes, the Airdeko Anti-Theft Locking System helps secure your cover to the concrete slab and prevents air conditioning theft.

If you have additional questions, please contact us here. You can also send a text or whatsapp to our support team at (305)-439-5532.

Holly R.

This product is fantastic! It is so architecturally pleasing, and you would never know there is an air conditioner underneath it. The quality is fantastic and it is easy to put together. Jerry is incredibly communicative and helpful and pleasant. You can tell by the way it is packaged and delivered, even including gloves to install it, that Jerry really cares about his product. I strongly recommend this!

Alex Z.

Perfect product, just what I needed. Shipping was fast, something under a week coast to coast. Jerry was very helpful in selecting correct cover size. Many thanks.

JEAN-MARIE L.

Thank you to Jerry. He has helped me to make the right choice. The order arrived quickly, And the packaging was unbelievable! Exceedingly strong box, each piece of the AIRDEKO was well-wrapped and well-protected against any damage during transport. The cover is well-designed and fits well with the elongations provided Thank you very much. JML

Paul R.

Fit perfectly, great communication. Very pleased with the results.

Thomas B.

It is very sturdy and fits over my large compressor unit very well. Unfortunately there is not enough room behind it to place the concrete screws and drill them in. Otherwise, I’m pleased. Jerry is very attentive and helpful.

Harold S.

This is a fantastic product. I wish I had discovered it sooner. It was easy to put together and install, and, blends nicely with my cedar siding and hides my ugly mini-split. Customer service at Airdeko is extraordinary with Jerry willing to bend over backward to make my experience as easy and pleasurable as possible. Hal Schichtel

Michael S.

Overall, the cover looks nice. It appears there have been some manufacturing changes which made assembling it a bit difficult. While attaching the side panels, rather than holes for the bolts, there were slots. Unfortunately the washers provided are barely large enough to ensure the bolts stay upright while tightening them. Either stick to the holes that line up on all pieces, or provide your customers with larger washers.

Nick S.

AirDeko’s customer service is top notch. When I received my cover, I initially had an issue. I reached out to AirDeko and they promptly responded, and sent me replacement parts to resolve the issue. End result, I have a beautiful cover for my new Mini Split system! Highly recommend purchasing from AirDeko! We’re in a townhome in Flagstaff with an HOA that has high hurdles for aesthetics to add an AC system, especially in our case where we have no side walls to place the compressor and it has to go in the front of the property. The AirDeko cover has more than satisfied their aesthetic requirements and judging by all the complements we’re getting from the neighbors, I believe it’s now the new bar all future installations will be compared against. I should also note installation was easy with the instructions and provided glove and tools. Highly recommended! - Nick

Charles H.

Probably the best mini split cover available, super happy with my purchase!

Wesley B.

The cover looks great and fits perfectly. The only negative was that our unit did not ship per commitment, nor did it arrive with the feet that were promised. Once I let them know we were missing the feet, they were shipped.

David B.

Beautiful cover. Simple to assemble. Area looks much better!

Tod S.

I was installing a mini split at my beach condo. My neighbor did first. They work great. I saw Airdeko randomly online. I showed my neighbor and she wanted one too. We got em. Look way better than the unit. Thanks for making something cool. Makes our beach side walk look attractive. Thanks. Tod - San Diego

Jon M.

Jerry was an absolute pleasure to work with. He took care of all of my needs and helped expedite the shipment as we had security concerns. We would absolutely recommend this product.

James R.

I liked the quality and it's ease of installation. Securing the L brackets to the mini split sub frame was easily done. I used c clamps to secure the unit to the L brackets (I may change that concerned that C clamps may work loose after some time.). Packing quality was excellent no damage when received. The biggest advantage for me was the support I received before making my decision to buy. The co founder worked with me to choose the possibility of mounting it on a sub frame. We exchanged photos of what my mini split looked like before. We decided that it would work installing it on the sub frame rather then the concrete slab. Thank You for your help you are a first class company. James Rawding Binghamton NY

Bryce M.

Both the large and medium covers look good. Because the walkway where the split unit compressors are installed are somewhat sloped, I had to shim the covers to make them level. I used "Trex" composite wood 1X6 (2 boards on one end and one on the other) to compensate for the walkway slope. I then had to find a way to easily remove the cover to service the units. I used 3/8" "drop-in" anchors and oversized the anchor holes in the Trex boards for easier removal. Used oversize fender washers and nut to accommodate the oversized holes drilled in the Trex boards. Suggest that some kind of "adjustable foot" be an option on 4 corners of the cover unit (similar to what kitchen base cabinets have). Slopes and uneven mounting surfaces can be thereby easily accommodated. Have an anchor option on those adjustable feet too. My compressor units (like most I suspect) were mounted too far from the wall to use the wall mounted feature.

Kevin K.

I was skeptical but it looked good. So I ordered it. I love it and was a great decision. Came pretty quickly and well packaged. Easy to put together. Watch out as the edges are sharp. Love the look and quality. It fit amazing around my mini split and really looks great. I recommend this one. Cost is a little pricy but it is made well.

Kimberly Z.

This cover was just what we needed!

Andre S.

Fit great. Excellent customer service

Wes P.

The cover arrived, was assembled and installed without problem. I have ordered a set of support brackets to tie the unit to the masonry wall outside our offices.

Nedra G.

Exactly as described on the Website and was easy to build. So happy I bought it. Worth every penny. :)

Ulysses H.

Excelente product and greater service. extremely impressed

Arch S.

Glad you guys added the brown color. Perfect fit for my house. Good product, thanks again for the install instructions.

Mini-Split Covers	Dimensions
Small	W 39.3” - H 27.5” - D 19.7”
Medium	W 45.2” - H 34.6” - D 21.6”
Large	W 47.2” - H 47.2” - D 21.6”

Central AC Covers	Dimensions
XL	W 39.3” - H 40.3” - D 39.3”
XXL	W 39.3” - H 50” - D 39.3”
Jumbo	W 39.3” - H 60” - D 39.3”

Rubber Legs Kit	Dimensions
Small	W 4.3” - H 2.28” - D 2.0”
Large	W 4.45” - H 3.54” - D 2.0”

Mini-Split AC Cover - Bronze

We're taking care of things so you don't have to

FLAT RATE SHIPPING

SATISFACTION GUARANTEE

WE'RE HERE TO HELP

FAQ